David's photos

Most Popular Photos

More of the same ! I had no router, and didn't want to buy one, so, all holes were cut with a 21", parrallel - arm Scroll - Saw
from : " P S Wood Machines " in Bethel Park, PA. I cut the inner, MDF hole a bit larger in diameter, so that the poor Peerless wouldn't think it was in a tube ! Ten holes to cut on each speaker - box, ( counting the two on the front 1/8" ply overlay ) !!
HOWEVER : TOTAL MDF DUST : 1/2 Teaspoon !!!

Speakers " Popped - Out " for you ! Those four little , square pieces of masking - tape just say " T " + " W " etc. I got a bit dizzy
with all the " PLUS " and " MINUS " ends, while connecting the wires from the crossovers to the speakers and to the Terminal Block !
Everything soldered, using my 50' spool of " PG " 12 AWG wire
from PE. Ends of wires on the Terminal - Block, however, have
round lugs from Radio Shack.

Pretty leaf from our Christmas Poinsettia, just before we threw it out !

Woofer Crosover. On the Tweeter Crossover, One stack of caps is : Solen Met. - Poly, + Dayton Film - Foil + Theta Film - Foil. The other is : Solen Met.
- Poly and Theta Film - Foil. All internal wires are my 12 AWG
" PG " OFC Copper from PE, just because I had a large spool and because it looks so pretty !

Rear. Port and Terminal Block from PE. Just an accident , but note the grain - pattern on the side : Doesn't it look like sound - waves fanning - out from a point beside the Terminal - Block ?

Peg - Board and Bench. Dark thing to the left of the blue vise is
a 1950 Sears Jig Saw.

Here is the " Production Control Supervisor " all tuckered - out
after five months of intense, exacting work !
And, remember : For the WHOLE PROJECT,
only One - Half - Teaspoon of MDF dust !!

Pretty pink rose.

" Straight On " shot, with the front door opened, to get some sunlight on the front .

Same as above, with slightly different lighting.

Also indoors, without white blanket behind, showing some of the top veneer. Stain is two coats of ZAR Rosewood, over
" Minwax " Wood Conditioner. Same stain on Birch Ply sides and on Mahogany tops !

Thin, 1/8" Baltic Birch, Aircraft Plywood on front, to provide flush
mounting for speakers. Indoors, with strobe. Rear side is just as built, with some end - grain.

Top 255 Photo Keywords

air • air core inductor • basement • by pass capacitors • cabinets • capacitors • cat • construction • core • crossovers • dave • davewebberspeaker • ducted • ducted port • hand tools • hi fi speakers • hi fi speaker construction • hyb • inductor • lwd • mdf • mdf cabinets • pass • passive • passive crossovers • pegboard • port • scroll saw • shop • speaker • speakers • tweeter • two way speakers • usher • usher tweeter • vega rip fence • webber • wood shop

Galleries

New Storage Shed :

New Storage Shed

Updated: Apr 07, 2009 12:00pm PST

My Wood Shop :

Updated: Apr 29, 2004 6:50pm PST

" U - PEEs " Finished ; ( All But Grills ! ) :

" U - PEEs " Finished ; ( All But Grills ! )

Updated: Mar 24, 2004 1:35pm PST

2-Way Speakers and Cabinets :

2-Way Speakers and Cabinets

Updated: Mar 19, 2004 7:36am PST

Photo Timeline

Browse by: All (59) 2004(33) 2009(26)

Or, pick your own date range:

Start day: Stop day:

Available Feeds | What are feeds?

Recent Galleries:

Atom |

RSS

Recent Photos:

Atom |

RSS

Popular Photos:

Atom |

RSS