photo pages:  <  1  2  
< 12 of 14 >
David > Same as above, with slightly different lighting.
David > Also indoors, without white blanket behind, showing some of the top veneer. Stain is two coats of ZAR Rosewood, over " Minwax " Wood Conditioner. Same stain on Birch Ply sides and on Mahogany tops !
David > Thin, 1/8" Baltic Birch, Aircraft Plywood on front, to provide flush mounting for speakers. Indoors, with strobe. Rear side is just as built, with some end - grain.
David > Flat black enamel on front and back. Perhaps a second coat would help. Black caulking PE sent not under Woofers yet. Outside, with strobe.
David > Magogany Veneer from Woodcraft, on top. Had to splice ; just slightly visible. Outside, sunlight only.
Thin, 1/8" Baltic Birch, Aircraft Plywood on front, to provide flush
mounting for speakers. Indoors, with strobe. Rear side is just as built, with some end - grain.
David > Thin, 1/8" Baltic Birch, Aircraft Plywood on front, to provide flush mounting for speakers. Indoors, with strobe. Rear side is just as built, with some end - grain.
Thin, 1/8" Baltic Birch, Aircraft Plywood on front, to provide flush
mounting for speakers. Indoors, with strobe. Rear side is just as built, with some end - grain.
See photo in gallery
photo pages:  <  1  2  
< 12 of 14 >

Comments

|

New comment:

Name: Email: Link:


To foil spammers, enter this code: copy this text in this box: Code unreadable?